[ Pobierz całość w formacie PDF ]
.Oil· Other oils may be used provided they meet the following specifications:Checking FrontAxle Oil Level· API Class GL-5.Changing FrontAxle OilChecking Front Axle Oil LevelTransmission andHydraulic OilIMPORTANT: Avoid damage! Allow oil one hour to settle before checking levelCheckingto ensure accurate dipstick reading.Re-check oil level after several hours ofTransmission Oiloperation.LevelChangingTransmission Oilfile:///C|/projects/jd/manuals/utility/990/manuals.om/cceomview/omlvu10907_a0/output/lvu10907na10.html (1 of 8) [4/3/2005 10:38:13 AM] Service Transmissionand Filter1.Park machine safely.(See Parking Safely in the SAFETY section.) Allowmachine to cool down for at least one hour.ServiceElectricalServiceMiscellaneousTroubleshootingStorageAssemblySpecificationsWarrantyJohn DeereQualityMX4171Statement2.Remove dipstick (A) located at right side of front axle.Service Record3.Wipe dipstick dry.Insert dipstick into axle hole but DO NOT tighten into axlecase.Copyright©Deere &CompanyMIF4.Remove dipstick.Oil level should be at top mark (B).If oil level is low:a.Add John Deere GL-5 Gear Lubricant or equivalent through dipstick openinguntil oil level is correct.b.Install and tighten dipstick.5.Check front axle oil level again after the first several hours of operation.Changing Front Axle OilNOTE: Change front axle oil immediately after operating tractor while oil is stillwarm.1.Park machine safely.(See Parking Safely in the SAFETY section.)file:///C|/projects/jd/manuals/utility/990/manuals.om/cceomview/omlvu10907_a0/output/lvu10907na10.html (2 of 8) [4/3/2005 10:38:13 AM] Service TransmissionMX41712.Remove dipstick (A) at right side of front axle or the fill plug at same locationon left side of front axle.NOTE: For draining purposes, front axle contains approximately 2.1 L (2.25 qt)of oil.3.Prepare drain pan under axle drain plug (B) at both sides of front axle.Remove axle drain plugs and allow to drain completely.MX41724.Prepare drain pan under differential drain plug (C).Remove differential drainplug and allow to drain completely.5.Install and tighten drain plugs (B and C) after all oil has drained.6.Add approximately 2.1 L (2.25 qts) of John Deere GL-5 Gear Lubricant orequivalent through dipstick or fill plug opening.7.Install and tighten dipstick or fill plug.file:///C|/projects/jd/manuals/utility/990/manuals.om/cceomview/omlvu10907_a0/output/lvu10907na10.html (3 of 8) [4/3/2005 10:38:13 AM] Service TransmissionIMPORTANT: Avoid damage! Allow oil one hour to settle before checking levelto ensure accurate dipstick reading.Check oil level after several hours ofoperation.8.Check front axle oil level.Transmission and Hydraulic OilUse oil viscosity based on the expected air temperature range during the periodbetween oil changes.The following John Deere transmission and hydraulic oil is preferred:® (JDM J20D)· Low Viscosity HY-GARDThe following John Deere oil is also recommended if preferred oil is notavailable:® (JDM J20C)· HY-GARDOther oils may be used if recommended John Deere oils are not available,provided they meet one of the following specifications:· John Deere Standard JDM J20D· John Deere Standard JDM J20C® and HY-IMPORTANT: Avoid damage! You can mix Low Viscosity HY-GARD®.Do not mix any other oils in this transmission.Do not use engine oilGARDor "Type F" (Red) Automatic Transmission Fluid.file:///C|/projects/jd/manuals/utility/990/manuals.om/cceomview/omlvu10907_a0/output/lvu10907na10.html (4 of 8) [4/3/2005 10:38:13 AM] Service TransmissionMIFChecking Transmission Oil LevelIMPORTANT: Avoid damage! Allow oil one hour to settle before checking levelto ensure accurate dipstick reading.Check oil level after several hours ofoperation.1.Park machine safely.(See Parking Safely in the SAFETY section.) Allowmachine to cool down for at least one hour.file:///C|/projects/jd/manuals/utility/990/manuals.om/cceomview/omlvu10907_a0/output/lvu10907na10.html (5 of 8) [4/3/2005 10:38:13 AM] Service TransmissionMX41492.Remove dipstick (A) located behind operator's seat.Wipe dipstick with aclean rag.3.Return dipstick to dipstick tube and seat it in position.MX41504.Remove dipstick and check oil level.Oil level should be up to mark (B).IMPORTANT: Avoid damage! Do not overfill transmission.Oil expands duringoperation and could overflow.5.If oil level is low, fill to correct level with John Deere Low Viscosity HY-® (JDM J20D) or equivalent.GARDChanging Transmission Oil and Filter1.Run engine a few minutes to warm the transmission oil.2.Park machine safely.(See Parking Safely in the SAFETY section.)NOTE: For draining purposes, the transmission contains approximately 21 L (5.5gal) of oil.MX4151file:///C|/projects/jd/manuals/utility/990/manuals.om/cceomview/omlvu10907_a0/output/lvu10907na10.html (6 of 8) [4/3/2005 10:38:13 AM] Service Transmission3.Place a drain pan under either transmission drain plug (A).Remove the drainplug.Allow oil to drain completely.4.After oil is drained, remove cap screws (B) and suction strainer cover (C) atright side of transmission.5.Pull out suction screen inside of transmission housing.6.Clean suction screen with a mild solvent.Allow to dry.7.Install suction screen and cover.Secure with cap screws.MX41528.Place a drain pan under hydraulic oil filter (D) at left side of machine.Removeand discard filter.Allow residual oil to drain completely.9
[ Pobierz całość w formacie PDF ]
Tematy
IndexJohn Ringo Ghost 01 Ghost
John Norman Gor 04 Nomads of Gor
John Norman Gor 01 Tarnsman of Gor
John Norman Gor 23 Renegades of Gor
John DeChancie Castle 07 Castle Spellbound
John Norman Gor 12 Beasts of Gor
John Dalmas Farside 01 The Lion of Farside
North Freya Sekrety ich nocy
szal John Lutz
Tuchorski Andrzej Rezydent wieży. Księga I